Rotates to open & close with 360° socket access.
Ideal for workstations & meeting rooms.
Easy to install.
PANDORA is an exciting new solution from OE Elsafe for providing power and USB charging to workstations and meeting areas. Fitting neatly into a 128mm+ grommet hole with a near flush profile when closed, PANDORA rotates open to provide 360° socket access.
Great looks, simple installation and a choice of international socket options including our class leading OE Elsafe TUF A+C, Twin USB Fast charger, makes PANDORA perfectly suited to meeting tables, informal break out areas, cafés, hotels and public spaces.
PANDORA is moulded in either white (9003) or black PC/ABS for both excellent durability and appearance. As an alternative to the standard textured finish, the clean profile of PANDORA when not in use can be enhanced by optional brushed stainless steel inlays.
+ See Fitting Instructions
|PANDORA’s 3 socket apertures may be configured with any combination of power and USB charging including our class leading TUF A+C: Twin USB Fast charger.|
|Body and grommet – Fire retardant PC/ABS|
Securing nut – Nylon 6
|Body and grommet – White (9003) or Black|
Inlays – Brushed stainless steel (only available with a black body and grommet)
Power, TUF and data/AV fascia’s – White, Black and Grey
Power Connection Options
|2000mm Australia/New Zealand 10A 3 pin plug|
800mm lead to J Coupler
1400mm lead to J Coupler
|PANDORA drops into a 128mm routed grommet hole (or a hole made with a 5″/127mm hole saw) e.g. in a table top and is then secured by tightening by hand the securing nut. No tools are needed once the grommet hole is cut, but access below/behind the fixing surface is required. Alternatively, a PANDORA with the inlay type grommet can be fixed to a surface via four screws without rear access being needed. The inlays will then cover the screw heads.|
Quality and Testing
|Visual: Configuration and appearance.|
Power sockets: Continuity, polarity, insulation and earth
USB charger: Output voltage and resistance
All sockets continuity tested with batch performance testing
“We test every pin on every connection in every socket”
Clamp Fix (Inlay/inclined frame)
Rear access required
Screw Fix (Inlay frame only)
Rear access not required
PANDORA drops into a 128mm* grommet hole e.g. in a table top and is then secured by tightening by hand the securing nut. No tools are needed once the grommet hole is cut, but access below/behind the fixing surface is required. Alternatively, a PANDORA with the inlay type grommet can be fixed to a surface via four screws without rear access being needed. The inlays will then cover the screw heads.
For both fitting methods, it is recommended that the cable to the rear of the panel, next to PANDORA’s hinge, is secured using the accompanying Cable Cleat, to prevent drag on the hinge mechanism.
*A 5” (127mm) hole saw will usually achieve a 128mm hole. If the hole is to be CNC machined, please cut a 128mm hole.