Stylish, compact and robust design.
Above or under mount options.
Optional TUF-PD fast charger.
International power options.
PHASE is an exciting new concept in power modules from OE Elsafe, that is ideal for providing convenient but discreet power, data and USB Fast charging in offices, hotels, restaurants, airports and many other locations.
Compact, robust and unconstrained by convention, you will find PHASE with its innovative concealed mounting bracket and through back or through base cable entry options, simple to securely install on desks, tables and soft furnishings.
PHASE is available in either white or black with your choice of grey or black socket fascias.
|PHASE may be configured with any combination of power, data/AV and USB charging including our class leading TUF-PD: Twin USB Fast charger.|
|High-strength and flame retardant polycarbonate main body and back mouldings. Nylon slide-on/clip-on universal mounting bracket.|
|Body – black or white
Power socket fascias – black or grey
TUF fascias – black or grey
Data/AV fascia – black or grey
Power cable – Black or white
Power Connection Options
|2000mm Australia/New Zealand 10A 3 pin plug
800mm lead to J Coupler
1400mm lead to J Coupler
Quality and Testing
|Visual: Configuration and appearance.
Power sockets: Continuity, polarity, insulation and earth
USB charger: Output voltage and resistance
All sockets continuity tested with batch performance testing
“We test every pin on every connection in every socket”
Power & Twin USB Fast Charging (TUF)
Fascia colours available in white, black, grey & red (Australia/New Zealand Socket only)
Data & Audio Visual
Fascia colours available in white, black & grey – keystone options below
Soft Wired Data & AV Leads
A selection of international sockets available on request
Images, layouts and colours shown are for illustration purposes only.
Rear Cable Exit Fitting
PHASE has been designed in such a way as to make fitting very easy. Simply screw the mounting bracket to the surface you intend to mount PHASE and slide PHASE into place.
PHASE can also be clipped into place if the cable is exiting via the base. In this case the universal Mounting Bracket should be screwed into place as shown ensuring that screw ‘A’ is not fully tightened. PHASE is then clipped into place as shown.
PHASE can be removed by disengaging the retaining clips, and following the steps for either installation method in reverse.
Simply push retaining clips towards fixed surface then slide PHASE off bracket
For mounting onto soft furnishings, bespoke metal brackets can be provided which are bolted to the standard nylon bracket, which then attaches to the Phase body.
Base Cable Exit Fitting