Qikfit Power

Soft wired or hard wired.

Compatible with OE Elsafe rails, in-desk boxes, floor boxes & cable management systems.

OE Elsafe’s dynamic Qikfit power series has been designed to fit OE Elsafe’s rails, power boxes and cable baskets as well as industry standard cut-outs. Qikfit simply clicks into place for quick and efficient installation. Stylish slim and sleek Qikfit will complement any workspace or office environment.

The Qikfit sockets are auto-switched for a clean look and efficient operation. The multi directional sockets on the 4 gang Qikfit allow for an array of chargers and plug packs to be used simultaneously. The Qikfit series comes with either soft wired installation couplers, allowing for quick and easy change and CHURN to suit any office environment or a hard wired option which incorporates a cable with the OE Elsafe J-Coupler on the end.

The J-Coupler allows for power to pass through the J-Coupler and feed the Qikfit.

OE Elsafe’s Thick Panel Frame is also available for installing Qikfit directly into a screen or panel 3mm to 14mm thick.

Qikfit 2GPO TUF

2 GPOs + TUF Charging
USB Type-A and Type-C

Qikfit TUF

Twin USB Fast Charging
USB Type-A and Type-C

Qikfit Data

AUNZ Data | Keystone
Soft Wired Data

Qikfit Audio Visual

HDMI | USB | VGA | Audio
Audio Visual Leads

Features

  • Many of the OE Elsafe rails, floor boxes and ceiling boxes have been designed to accommodate the QIKFIT range of products allowing for the same complimentary look to flow through the entire office environment (please also refer to the QIKFIT TUF,  QIKFIT data and QIKFIT AV range of products).
  • All of the sockets are rated at 10A 250V.
  • 20A GST connectors suit Wieland GST cabling which is low profile and re-wireable.
  • The soft wired QIKFIT comes with GST male and female connectors allowing for multiple QIKFITs to be daisy chained.
  • The hardwired QIKFIT is supplied with a sturdy 20A cable with an Elsafe J-Coupler, allowing for power to pass through the J-Coupler and feed the QIKFIT.
  • The four gang QIKFIT incorporates multi directional sockets to allow for an array of chargers and plug packs.
  • The QIKFIT range will fit industry standard cut outs.
  • The QIKFIT two gang can accommodate round earth for U.P.S., dedicated power (with red faceplates).
  • The QIKFIT can be ordered in four colours (black, white, grey and red) to suit your specific needs.

Qikfit in screen panel mount australian gpo power OE Elsafe

Qikfit Series Approval No. NSW 23497. The GST connectors incorporated into the QIKFIT are compliant to standards IEC 61535 and AS/NZS 61535.

Dimensions

QIKFIT Power

Available in white, black, grey and red fascia’s with white or black leads/J couplers.

2 GPO – Flat Earth

MF – Male and female connectors
HW800 – 800mm lead to J Coupler
HW1400 – 1400mm lead to J Coupler with female connector

4 GPO – Flat Earth

MF – Male and female connectors
HW800 – 800mm lead to J Coupler
HW1400 – 1400mm lead to J Coupler with female connector

2 GPO – Round Earth (red only)

MF – Male and female connectors
HW800 – 800mm lead to J Coupler
HW1400 – 1400mm lead to J Coupler with female connector

4 GPO – Round Earth (red only)

MF – Male and female connectors
HW800 – 800mm lead to J Coupler
HW1400 – 1400mm lead to J Coupler with female connector

Thick Panel Frame

The Qikfit Thick Panel Frame has been designed to accommodate the Elsafe Qikfit Series in a screen or other surface from 3mm to 14mm thick. The sleek and easy to install frame comes in white, black or grey in a QF45 size only. This is a brilliant cost effective mounting method that can be installed in a range of different configurations.

 

Technical

The Thick Panel Frame comprises of three parts: the Frame which is made from Polycarbonate and two frame clips which are made from a Nylon 6/6 to allow
the clip to spring as required. The clips are able to be adjusted for height variations in panels 3 – 10mm and panels 6 – 14mm thick.

 

Cutout

Mounting of QF items in Thick Panel Frames

The three posts moulded into the frame are integral to the stability of the Thick Panel Frame. For installation of data (can fit up to 9 x QF5 tiles), these posts will stop distortion to the straight lines of the frame. For Power or TUF configurations, these posts can be easily removed to accommodate the module as per below.

    

 

    

Cutout Dimensions