QikFIT TUF
TUF USB A+C (25W) Fast Charging Power Module.
Compatible with OE Power Rails and Table Boxes.
Charges tablets and smartphones.
QikFIT TUF is the compact solution to fast USB charging, featuring OE Elsafe’s TUF A+C fast charging technology. QikFIT TUF provides a combined 25 W max to charge smartphones, tablets and laptops in super-fast time.
QikFIT TUF is suitable for panel mounting with built-in mounting clips for tool-less installation in panels up to 3 mm thick. QikFIT TUF can be used on its own or combined with the OE Elsafe QikFIT series to create a range of OE Elsafe rails and panel mounts.
Quick and easy to install, connecting to the power supply via an integrated GST 18/3 male connector. QikFIT TUF can be daisy chained using either OE Elsafe J-Couplers or GST distribution blocks connected to a single starter or from a mains AC socket.
For Laptop fast charging please see the TUF-R HP (high powered) module.
TUF is safe and designed for public spaces, no data transfer is possible.
Data transfer is not possible as TUF has no external data connections or the ability to store enough code to put malware on a device.
QikFIT Power
Soft / Hard Wired
QikFIT 2GPO TUF
USB Type-A and Type-C
QikFIT Data / AV
Soft Wired Data / AV
QikFIT TPF
Panel Mounted Power
- Technical Info
- TUF - USB Charger Specs
- Charging Times
- Thick Panel Frame
- Compatible Products
- Fitting
- Resources
- Codes
- Contact Us
Configuration |
1 x Type A USB charging port and 1 x Type C USB charging port Male Wieland GST input |
Construction |
Fascia – V0 Polycarbonate Back – V0 Polycarbonate |
Size Options |
Fascia to suit connection to a 2GPO QikFIT – Also suitable for use in lockers Fascia to suit connection to a 4GPO QikFIT |
Colour Options |
Fascia – Black, white, and grey |
Power Connection Options |
Male Wieland GST input only |
Installation |
Panel mount clips for surfaces 1mm to 3mm thick. When used in conjunction with the QikFIT Thick Panel Frame the QikFIT series can be mounted into panels from 3mm to 14mm thick. |
Quality and Testing |
Visual: Configuration and appearance. Power sockets: Continuity, polarity, insulation, and earth USB charger: Output voltage and resistance All sockets continuity tested with batch performance testing “We test every pin on every connection in every socket” |
Features |
|
TUF – Twin USB Fast Charger Specifications
TUF is designed for device charging only. Data transfer is not possible, as TUF has no external data connections or the ability to store enough code to put malware on a device..
| USB charging outlets | 1 x Type A Female (reversible) 1 x Type C Female (reversible) |
| Charging Current | Max 5A in total |
| AC voltage range | 240V AC 50/60Hz |
| AC input current | Max 0.6amp at full load <0.5mA at no load |
| Rated total Output | 25W max |
| Output voltage | 5V DC +- 5% |
| Standby Power use | <0.05W |
| Life expectancy | Min 5 years in normal use |
| USB connector | Gold Plated Min. Insertions – 5,000 for Type A, 10,000 for Type C |
| Over current protection | Yes – Auto reset |
| Short Circuit protection | Yes – Auto reset |
| Operating Temperature | 0° to 30°C |
| Max relative humidity | 85% RH |
| Safety Certifications |
Safety – IEC62368-1:2014, A11:2017 FCC 47 : Part 15 |
| Additional Features | • Dynamic voltage adjustment to compensate for cable voltage loss • Protection from external surges • Blue LED, turns green during power delivery / quick charge |
*Insertion lifetime refers to USB contacts only.
Indicative Charging Times
From 10% to 90%
| Device | Time |
| iPhone X | Type C – 79 minutes
Type A – 86 minutes |
| iPhone 8+ | Type C – 71 minutes
Type A – 75 minutes |
| Samsung Galaxy Note 8 | Type C – 69 minutes
Type A – 87 minutes |
| iPad Pro 9.7 | Type C – 125 minutes
Type A – 235 minutes |
| Macbook Pro 13″ Laptop | Type C – 235 minutes |
Thick Panel Frame
The QikFIT Thick Panel Frame has been designed to accommodate the Elsafe QikFIT Series in a screen or other surface from 3mm to 14mm thick. The sleek and easy to install frame comes in white, black or grey in a QF45 size only. This is a brilliant cost effective mounting method that can be installed in a range of different configurations.
Technical
The Thick Panel Frame comprises of three parts:
– Frame which is made from Polycarbonate
– Two frame clips which are made from a Nylon 6/6 to allow the clip to spring as required. The clips are able to be adjusted for height variations in panels 3 – 10mm and panels 6 – 14mm thick.
Cutout
Mounting of QikFIT Thick Panel Frame:
The QikFIT panel comes with three moulded posts for stability. For installation of data (up to 9 x QF5 tiles), do not remove the posts. For Power, data and AV mixed configurations, remove posts as per the guide below.
For all data / AV (up to 9), leave all posts. For 2GPO plus data / AV, remove 1 (left) posts.
For 2GPOTUF in central mount, remove all posts. For 4GPO, remove all posts
Cutout Dimensions
Fitting
For assistance and pricing please call 1300 ELSAFE (357 233) or email your request to sales@oeelsafe.com.au